Safety Informations - TR-Electronic C 115 Serie Gesamt-Bedienungsanleitung

2.9 Safety informations



The measuring system contains electrostatically endangered circuit
elements and units which can be destroyed by an improper use.
-

Disposal
If disposal has to be undertaken after the life span of the device, the respective
applicable country-specific regulations are to be observed.
Printed in the Federal Republic of Germany
05/19/2017
Destruction, damage or malfunctions of the measuring system and
risk of physical injury!
De-energize the system before carrying out wiring work or opening and
-
closing electrical connections.
Do not carry out welding if the measuring system has already been
-
wired up or is switched on.
Ensure that the area around the assembly site is protected from
-
corrosive media (acid, etc.).
Avoid any shocks (e.g. hammer-blow) on the shaft while mounting.
-
Do not open the measuring system.
-
Contacts of the measuring system connection contacts with the fingers are to
be avoided, or the appropriate ESD protective measures are to be applied.
TR - ECE - BA - DGB - 0125 - 02
 TR-Electronic GmbH 2016, All Rights Reserved
Page 29 of 31