Herunterladen Inhalt Inhalt Diese Seite drucken

General Status Codes - TR-Electronic C 115 Serie Gesamt-Bedienungsanleitung

Absolut encoder
Inhaltsverzeichnis

Werbung

Causes of faults and remedies

10.2 General Status Codes

The following table lists the Status Codes that may be present in the General
Status Code field of an Error Response message. The extended status code is
object specific and is defined under the respective object if the object supports further
extended status codes.
HEX notation
General
Status Code
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0A
0x0B
0x0C
0x0D
0x0E
0x0F
0x10
...
 TR-Electronic GmbH 2013, All Rights Reserved
Page 172 of 175
Name
Description
Service was successfully performed by the object
Success
specified.
A connection related service failed along the
Connection failure
connection path.
Resource
Resources needed for the object to perform the
unavailable
requested service were unavailable.
Invalid parameter
See Status Code 0x20, which is the preferred
value
value to use for this condition.
The path segment identifier or the segment
syntax was not understood by the processing
Path segment error
node.
The path is referencing an object class, instance
Path destination
or structure element that is not known or is not
unknown
contained in the processing node.
Partial transfer
Only part of the expected data was transferred.
Connection lost
The messaging connection was lost.
Service not
The requested service was not implemented or
supported
was not defined for this Object Class/Instance.
Invalid attribute
Invalid attribute data detected.
value
An attribute in the Get_Attribute_List or
Set_Attribute_List response has a non-zero
Attribute list error
status.
Already in
The object is already in the mode/state being
requested
requested by the service.
mode/state
Object state
The object cannot perform the requested service
conflict
in its current mode/state.
Object already
The requested instance of object to be created
exists
already exists.
Attribute not
A request to modify a non-modifiable attribute
settable
was received.
Privilege violation
A permission/privilege check failed.
The device's current mode/state prohibits the
Device state
conflict
execution of the requested service.
TR-ECE-BA-DGB-0102 v10
Printed in the Federal Republic of Germany
01/27/2022

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis