Inhaltsverzeichnis
Werbung
Parameterization
7.7.3.1 Attribute 1, Status
The Status attribute is a bitmap and indicates the status of the TCP/IP network
interface:
Bit Function
0-3
4
5
6
7-31 Reserved
7.7.3.2 Attribute 2, Configuration Capability
The Configuration Capability attribute is a bitmap that indicates the device's
support for optional network configuration capability:
Bit Function
0
1
2
3
4
5
6
7
8-31 Reserved
TR-Electronic GmbH 2013, All Rights Reserved
Page 158 of 175
Description
0:
1:
Interface
Configuration Status
2:
3-15:
Mcast Pending
-
Interface
Configuration
0:
Pending
AcdStatus
-
0:
BOOTP Client
DNS Client
DHCP Client
DHCP-DNS Update
Configuration Settable
Hardware Configurable
Interface Configuration
Change Requires Reset
AcdCapable
TR-ECE-BA-DGB-0102 v10
The Interface Configuration attribute has not
been configured.
The Interface Configuration attribute contains
valid configuration (DHCP, FLASH)
The Interface Configuration attribute contains
valid configuration (hardware switches)
Reserved
Indicates a pending configuration change in the
TTL Value and/or Mcast Config attributes. This
bit is set when either the TTL Value or Mcast
Config attribute is set, and is cleared the next
time the device starts.
No restart of the measuring system is required.
not supported
-
Description
0 (FALSE): not supported
0 (FALSE): not supported
1 (TRUE): Device corresponds to a DHCP client
0 (FALSE): not supported
1 (TRUE): Device supports a variable configuration
1 (TRUE): Device uses hardware switches
0 (FALSE): changed network configuration is
immediate active
0 (FALSE): not supported
0
Printed in the Federal Republic of Germany
01/27/2022
Werbung
Inhaltsverzeichnis
