Inhaltsverzeichnis
Werbung
Parameterization
...
Multiple
Collisions
SQE Test
Errors
Deferred
Transmissions
Late Collisions
Excessive
Collisions
MAC Transmit
Errors
Carrier Sense
Errors
Frame Too
Long
MAC Receive
Errors
Interface
Control
6
Set
Control Bits
Forced
Interface
Speed
7
Get
Interface Type
10
Get
Interface Label
Table 23: Ethernet Link, Overview of the instance attributes
TR-Electronic GmbH 2013, All Rights Reserved
Page 164 of 175
Successfully transmitted frames
UDINT
which experienced more than one
collision
Number of times SQE test error
UDINT
message is generated
Frames for which first
UDINT
transmission attempt is delayed
because the medium is busy
Number of times a collision is
UDINT
detected later than 512 bit-times
into the transmission of a packet
Frames for which transmission
UDINT
fails due to excessive collisions
Frames for which transmission
UDINT
fails due to an internal MAC sub
layer transmit error
Times that the carrier sense
condition was lost or never
UDINT
asserted when attempting to
transmit a frame
Frames received that exceed the
UDINT
maximum permitted frame size
Frames for which reception on an
UDINT
interface fails due to an internal
MAC sub layer receive error
STRUCT
Configuration for physical
of:
interface
Interface Control Bits
WORD
(see Attribute 6, Interface Control
on page 165)
Speed at which the interface shall
UINT
be forced to operate (in Mbps)
Type of interface:
0x02 = twisted pair
USINT
0x03 = fiber optics
SHORT_
Human readable identification
STRING
TR-ECE-BA-DGB-0102 v10
-
-
-
-
-
-
-
-
-
-
0x0001
-
0x02
-
Printed in the Federal Republic of Germany
01/27/2022
Werbung
Inhaltsverzeichnis
