Inhaltsverzeichnis
Werbung
Parameterization
7.4.3.8 Attribute 18, Position Measuring Increment
Position Measuring Increment returns the smallest incremental changing of
the position value it is firmly set to 1 step.
Connection path, Packed EPATH with 8 bit class
0x20
Logical Type
= Class
7.4.3.9 Attribute 19, Preset Value (≤ 32 bit)
This attribute only can be used for preset values ≤ 32 bit. For preset values ≤ 64 bit
the "Attribute 104, Preset Value Extended (≤ 64 bit)" shall be used (see page 146).
Preset Value (32 bit) is used to set the measuring system value to any position
value within the range of 0 to measuring length in increments –1. If a preset value >
measuring range are executed it is displayed by LED3 (see chapter 5.2 Bus status
display). The output position value is set to the Preset value parameter, if the
Set_Attribute_Single service is executed to this attribute.
DINT, Default: 1000
2
Connection path, Packed EPATH with 8 bit class
0x20
Logical Type
= Class
This attribute is immediately active and saved.
In order to ensure a safe acceptance of the instance attributes
●
●
●
changes must be first taken over or saved by means of Attribute 112 Accept
Parameter or the service code 0x16 Save. In a further step the new Preset
value can be written.
TR-Electronic GmbH 2013, All Rights Reserved
Page 132 of 175
0x23
Logical Type
Class #23
Danger of physical injury and damage to property due to an actual value
jump during execution of the preset adjustment function!
The preset adjustment function should only be executed when the
measuring system is stationary, or the resulting actual value jump must be
permitted by both the program and the application!
Byte 0
Byte 1
7
0
15
up to 2
2
0x23
Logical Type
Class #23
12, Direction Counting Toggle
16, Measuring Units per Span
17, Total Measuring Range in Measuring Units
TR-ECE-BA-DGB-0102 v10
0x24
0x01
Instance #1
= Instance
Preset Value
Byte 2
8
23
up to 2
2
up to 2
0x24
0x01
Instance #1
= Instance
0x30
0x12
Logical Type
Attr.-ID #18
=Attr.-ID
Byte 3
16
31
24
2
up to 2
0x30
0x13
Logical Type
Attr.-ID #19
=Attr.-ID
Printed in the Federal Republic of Germany
01/27/2022
Werbung
Inhaltsverzeichnis
