Attribute 28, Maximum Velocity Setpoint - TR-Electronic C 115 Serie Gesamt-Bedienungsanleitung

Parameterization
Access
Lower limit
Upper limit
Default
Connection path, Packed EPATH with 8 bit class
0x20
Logical Type
= Class
To save this attribute permanently the attribute 112 Accept Parameter or service
code 0x16 save must be executed.

7.4.3.17 Attribute 28, Maximum Velocity Setpoint

Minimum Velocity Setpoint defines the minimum value of the velocity. If this
value falls below in "Attribute 47, Warnings" the depending warn bit (7) is set to high.
DINT
2
Access
Lower limit
Upper limit
Default
Connection path, Packed EPATH with 8 bit class
0x20
Logical Type
= Class
To save this attribute permanently the attribute 112 Accept Parameter or service
code 0x16 save must be executed.
 TR-Electronic GmbH 2013, All Rights Reserved
Page 136 of 175
Set / Get
31
-2 , standard unit: rev/min
31
2 -1, standard unit: rev/min
0
0x23
Logical Type
Class #23
Byte 0 Byte 1
7 0 15
up to 2 2
Set / Get
31
-2 , standard unit: rev/min
31
2 -1, standard unit: rev/min
0
0x23
Logical Type
Class #23
TR-ECE-BA-DGB-0102 v10
0x24 0x01
Instance #1
= Instance
Maximum Velocity
Byte 2
8 23
up to 2 2 up to 2
0x24 0x01
Instance #1
= Instance
0x30 0x1B
Logical Type
Attr.-ID #27
=Attr.-ID
Byte 3
16 31 24
2 up to 2
0x30 0x1C
Logical Type
Attr.-ID #28
=Attr.-ID
Printed in the Federal Republic of Germany
01/27/2022