Additional Safety Instructions; Definition Of Symbols And Instructions; Additional Instructions For Proper Use - TR-Electronic CK-58 Benutzerhandbuch

Additional safety instructions

2 Additional safety instructions

2.1 Definition of symbols and instructions

2.2 Additional instructions for proper use

The measurement system is designed for operation with PROFIBUS-DP networks
according to the European standards EN 50170 and EN 50254 up to max. 12 Mbaud.
The parameterization and the device diagnosis are performed through the PROFIBUS
master according to the profile for encoders version 1.1 of the PROFIBUS User
Organization (PNO).
The technical guidelines for the structure of the PROFIBUS-DP network from the
PROFIBUS User Organization are always to be observed in order to ensure safe
operation.
Proper use also includes:


 TR-Electronic GmbH 2004, All Rights Reserved
Page 66 of 115
means that death or serious injury can occur if the required
precautions are not met.
means that minor injuries can occur if the required
precautions are not met.
means that damage to property can occur if the required
precautions are not met.
indicates important information or features and application
tips for the product used.
observing all instructions in this User Manual,
observing the assembly instructions. The "Basic safety instructions" in
particular must be read and understood prior to commencing work.
TR - ECE - BA - DGB - 00036 - 10
Printed in the Federal Republic of Germany
10/01/2014