Product Disposal - Fluke FEV300 Bedienungsanleitung

Introduction
The FEV300 (the Product or test adapter) tests the functions and the safety
of charging stations mode 3 for AC charging. The adapter imitates a car and
opens up a charging cycle (activate voltage/current output). This adapter
allows you to conduct tests in combination with appropriate test instruments
like Installation Tester, multimeter and/or Scope Meters (oscilloscope). With
this adapter, charging stations can be tested in accordance with IEC/EN
61851-1 and IEC/HD 60364-7-722.
Symbols
Symbol
WARNING. RISK OF DANGER.
W
WARNING. HAZARDOUS VOLTAGE.
X
Risk of electric shock.
Consult user documentation.

Earth
J
Double Insulated.
T
Measurement Category II is applicable to test and measuring
circuits connected directly to utilization points (socket outlets

and similar points) of the low-voltage MAINS installation.
PE
PE Protective Earth.
CP
CP Control Pilot.
Vehicles not requiring ventilation for indoor
charging areas.
Vehicles requiring ventilation for indoor charging areas.
This product complies with the WEEE Directive and its
marking requirements. The affixed label indicates that you
must not discard this electrical/electronic product in domestic
household waste. Do not dispose of this product as unsorted

municipal waste. For information about take-back and
recycling programs available in your country, see the Fluke
website.

Product Disposal

Dispose of the Product in a professional and environmentally appropriate manner:
• Delete personal data on the Product before disposal.
• Put the Product in the electrical waste.
1
Table 1. Symbols
Description