Safety
Staff requirements
Additional operator obligations
2.5 Staff requirements
Insufficient qualification
Authorised staff
84
n
The operator must ensure that all persons handling the linear
unit have read and understood this manual. Furthermore, they
must regularly train the staff and inform them of the hazards.
The operator must ensure that the staff have been trained in
compliance with the required staff qualifications.
The operator must provide the staff with the required protective
n
equipment and must issue the mandatory order to wear the
required protective equipment.
The operator must ensure that danger zones occurring during
n
assembly, operation, troubleshooting, maintenance and cleaning
of the linear unit are secured.
The operator is further responsible for ensuring that the linear unit
and the place of use are in a technically perfect condition at all
times. Therefore, the following applies:
n
The operator must ensure the required clearances and sufficient
lighting for safe working, as well as ensuring that the linear unit
and the place of use are kept permanently clean and tidy.
n
The operator must ensure that the maintenance intervals
described in this manual are adhered to.
Ä "Maintenance plan" on page 112
n
The operator must ensure that the maintenance intervals of the
subcontracted components are adhered to.
Ä "Other applicable documents" on page 71
n
The operator must ensure that the generally valid safety and
accident prevention regulations at the place of use are adhered
to.
n
The operator must ensure that all work on the linear unit is car-
ried out in a sufficiently air-conditioned room in which an exces-
sively hot or cold work environment is not expected.
WARNING!
Danger in the event of insufficiently qualified
persons!
Insufficiently qualified persons are unable to
assess the risks associated with handling the
linear unit and thus put themselves and others at
risk of severe or fatal injury.
– Only have suitably qualified persons carry out
– Insufficiently qualified persons must be kept
The different tasks described in this manual require the persons to
whom the tasks were assigned to have different qualifications.
Linear unit RK MonoLine R/RK MonoLine Z
all work.
away from the work area.
14.10.2021