Disassembly And Disposal; Safety Information For Disassembly And Disposal; Disassembly; Disposal - RK Rose+Krieger RK MonoLine R Montageanleitung

Disassembly and disposal

Disposal

8

Disassembly and disposal

8.1 Safety information for disassembly and disposal

Improper disassembly

8.2 Disassembly

8.3 Disposal
118
WARNING!
Risk of injury in the event of improper disas-
sembly!
Sharp-edged components, tips and corners on the
linear unit or the required tools can cause injury.
– Ensure that there is sufficient space before
– Handle exposed components with sharp edges
– Ensure that the work area is clean and tidy at all
– Disassemble components properly. Observe the
– Secure components so that they do not fall
– Consult with the manufacturer in the event of
Before starting disassembly:
n Physically disconnect the linear unit from the electrical power
supply (if available).
n Dispose of operating materials in an environmentally friendly
manner.
Then clean the modules and components properly and disas-
semble them, adhering to the applicable local occupational health
and safety and environmental protection regulations.
If no return or disposal agreement was concluded, have disas-
sembled components recycled:
Scrap metals.
n
n Have plastic components recycled.
n Dispose of other components sorted by their material composi-
tion.
Linear unit RK MonoLine R/RK MonoLine Z
starting work.
carefully.
times! Components and tools lying around or on
top of one another are sources of accidents.
components' sometimes high net weight. If
necessary, use lifting gear.
down or topple over.
uncertainties.
14.10.2021