Assembling The Centring Sets - Rk Rose+Krieger Rk Monoline R Montageanleitung

Assembly
Assembling optional modules > Assembling the centring sets

5.4.5 Assembling the centring sets

Applicable to
Assembling the centring sets
110
Version
Size
Personnel:
Protective equipment:
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
Fig. 39: Assembling the centring sets
A Centring set for RK MonoLine R, Z 40
B Centring set for RK MonoLine R, Z 60/80/120
1. Place the centring sets (Fig. 39/1) in the holes of the guide
carriage provided for this purpose.
2. Tighten the screw (Fig. 39/2):
Size
40, 60, 80,
120
ð The centring sets are assembled.
Linear unit RK MonoLine R/RK MonoLine Z
RK MonoLine R, Z
40/60/80/120
Assembly staff
n
n Protective clothing
n Safety shoes
Centring set B is delivered with 2 screws.
Use the screw which corresponds to the
slot's depth.
Screw size
M4
Tightening torque [Nm]
2
14.10.2021