Training; Safety Instructions; Device-Specific Safety Instructions - Hecht 8514 Originalbetriebsanleitung

A
CAUTIONG!
EN
Never use the product if it is close to people, especially children or pets.
The user is liable for all damages caused to third parties or their property.
C Keep these instruction manual and use them whenever you need more information.
If you don´t understand some of these instructions, contact your dealer. If the product
DE
is lent to another person, it is necessary to lent this instruction manual with it.

TRAINING

C All operating personnel must be adequately trained in the use, operation and
setting and especially familiar with prohibited activities.
CS
• No qualification is required except for detailed lesson of the use of unit.
• Never allow use by children or people unfamiliar with these instructions. Local regulations
may specify an age limit of the operator.
• This product is not intended for use by persons with reduced sensory or mental capacity or lack
of experience and konwledge - unless they are under the supervision of the person responsible
for their safety or if this person has instructed how use this product. The product is not
SK
intended for use by children and persons with reduced mobility or poor physical disposition.
We strongly recommend to pregnant women to contact her doctor before use of this product.
• Respect national/local regulations regarding working time (please, contact your local authority).

SAFETY INSTRUCTIONS

PL • Know your tool. Read owner's manual carefully. Learn its applications and
limitations as well as the specific potential hazards related to this tool. Familiarise
yourself with the controls on the machine and how to use them.
• Be careful at work, be concentrated on actual work, and use the common sense. An
inattention during work may result in loss of control over the machine.
• Do not use this machine if you tired, ill or under the influence of alcohol, drugs or medication.
• Do not put hands and feet near rotating parts.
HU
• Do not overreach. Keep proper footing and balance at all times. This enables better control
of the tool in unexpected situations.
• Remove any adjusting key or wrench before turning the machine on.
• Do not leave the equipment unattended in the workplace.
B
WARNINGG!
All starting preventions and controls used in the operator's presence must be
functional and properly and regularly checked. The safety systems or features must
not be altered or disposed of.

DEVICE-SPECIFIC SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS FOR USING THE BLOWER
• Reduce the risk of bystanders being struck by flying debris. Make sure no one is within 15 m
- that's about 16 paces—of an operating blower.
20 / 160
HECHT_8514_manual_2019.indd 20 10.06.2019 9:55:52