Herunterladen Inhalt Inhalt Diese Seite drucken

Inhaltsverzeichnis - 3M Elipar DeepCure-S Betriebsanleitung

Led-lichtgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
SEITE 1 - 148 x 210 mm - 3100021789/01 - SCHWARZ - 20-053 (kn)
ENGLISH
en
Elipar
DeepCure-S
LED Curing Light
Table of Contents
Safety
from/into the Handpiece
3M Adhesives
Extended Periods of Non-Use
Safety
PLEASE NOTE!
Prior to installation and start-up of the unit, please read
these instructions carefully!
As with all technical devices, the proper function and
safe operation of this unit depend on the user's
compliance with the standard safety procedures as well
as the specific safety recommendations presented in
Page
these Operating Instructions.
1
1. Use of the device is restricted to trained personnel in
3
accordance with the instructions below. The manu-
3
facturer assumes no liability for any damage resulting
3
from the use of this unit for any other purpose.
3
2. Prior to start-up of the unit make sure that the
3
operating voltage stated on the rating plate is
4
compatible with the available mains voltage. Operation
4
of the unit at a different voltage may damage the unit.
4
3. Position the unit so that the power plug is accessible
4
at all times. The power plug is used to turn the charger
4
on and off. To disconnect the charger from the mains,
4
remove the power plug from the electrical outlet.
4
4
4. Use only the 3M charger which is provided with the
5
unit. The use of any other charger can result in da-
5
mage to the battery.
5
5. CAUTION! Elipar DeepCure-S may be operated only
5
with the supplied battery or original 3M Elipar Deep-
5
Cure-S replacement batteries. The use of other bat-
6
teries can impair performance or cause damage to
6
the device.
6. CAUTION! Avoid using this device in close proximity
6
to other equipment or with other equipment in
6
stacked form, as this may result in improper function.
If use in the manner described before is necessary,
6
this device and the other equipment should be ob-
7
7
served carefully in order to ensure that they work
properly.
8
7. CAUTION. Do not stare at source. May be harmful
9
to the eyes. Restrict exposure to the area of the
9
9
oral cavity in which clinical treatment is intended.
9
Protect patient and user from reflection and intensive
11
scattered light by taking the appropriate precautions,
e.g., glare shields, goggles, or coverings.
12
8. CAUTION! As is the case for all high-intensity light-
curing devices, the high light intensity is accompanied
12
by heat generation on the exposed surface. This heat
12
can result in irreversible damage if there is longer
12
exposure in the proximity of the pulp or soft tissue.
12
The exposure times given in the manufacturer's
12
instructions must be observed exactly to avoid any
12
such damage.
13
Uninterrupted exposure times of the same tooth
surface in excess of 20 seconds and direct contact
1

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

122629 configurable

Inhaltsverzeichnis