Technical Specifications - Stryker IDEAL EYES Handbuch

• Sterrad
1. Clean and prepare the coupler as recommended in this
user guide.
2. If using a sterilization tray (optional), follow any
additional instructions provided with the tray. Use only
trays that are compatible with Sterrad
Not all sterilization trays are compatible with
Sterrad® systems. Using an incompatible tray
may result in incomplete device sterilization. Consult
the instructions that came with your sterilization tray
to determine which sterilization method is compatible
with your tray and devices. If a compatible tray is not
available, the devices can be double-wrapped prior
to using the Sterrad® system.
3. Double wrap the coupler (or tray) prior to sterilization.
4. Sterilize the coupler following the instructions of the
manufacturer, using the Sterrad® 100S, NX™, or 100NX™
Sterilization System. Select the standard cycle.
5. Allow the camera head, cable, coupler, and scope
to completely dry before reassembly. Any moisture
on the threads will cause the camera and coupler
windows to fog during use.
8
Stryker sterilization trays 0233032105 and 0233032107 are validated for
sterilizing the coupler using EO, V-PRO, and Sterrad. Consult user guides
1000400907 or 1000400926, respectively, for more information about using
the trays.
Storage
N/A

Technical Specifications

Transportation and Storage Conditions
Temperature: -18–60 °C
Relative Humidity: 15–90%
Operating Conditions
Temperature: 10–40 °C
Relative Humidity: 25–75%
10
.
8