Base Unit Specifications; General Specifications - Stryker 6100 RUGGED M1 Bedienungsanleitung

GENERAL SPECIFICATIONS

6100 Series M1r Base Unit − part number 6100−003−000
Length
Width
Height − Position 1
!
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
Weight
@
Maximum Weight Capacity
Caster Diameter/Width
Minimum Operators Required for Loading/Unloading 1
Recommended Cot Fastener Systems
Recommended Floor/Tray Height
! Height measured from bottom of mattress at seat section to ground level.
@ Standard base unit is weighed without optional accessories.
Stryker reserves the right to change specifications without notice.
The M1r Roll−In System is designed to conform to BS EN 1865, specifications for stretchers and other patient handling equipment used
in road ambulances and BS EN 1789 medical vehicles and their equipment − road ambulances.
The M1r Roll−In System, equipped with the AS/NZS 4535 upgrade, is designed to conform to AS/NZS 4535 Australian/New Zealand Stan-
dardt − Ambulance Restraint Systems.

Base Unit Specifications

1−13
77.4 inches (196.6 centimeters)
22.0 inches (55.9 centimeters)
14.4 inches (36.6 centimeters)
24.4 inches (62.0 centimeters)
30.0 inches (76.2 centimeters)
34.6 inches (87.9 centimeters)
37.6 inches (95.5 centimeters)
39.3 inches (99.8 centimeters)
13.0 inches (33.0 centimeters)
N/A
73.5 pounds (33.3 kilograms)
500 pounds (228 kilograms)
6 inches/2 inches
(15.2 centimeters/5.1 centimeters
Model 6381 Center Mount, Straight Guide
Model 6373 Center Mount DIN Guide
Model 6376 Center Mount, Straight Guide − No
Side Restraint Belts
27 inches − 31 inches
(68.6 centimeters − 78.8 centimeters)