7.6 Pre-selection Mode
4
During beverage dispensing, the
appears, which shows the progress made in the
cycle.
Pressing the icon will interrupt current dispens-
ing.
7.6 Pre-selection Mode
The "Pre-selection" function can also be activated in the page to access technical programming, by pressing the
1
Press the technician access icon
5
icon
When dispensing is complete, the
is removed from the list.
The
icon moves to the side of the next selection.
2
.
Press the pre-selection icon
icon is shown, and the beverage just dispensed
3
.
89 EN
icon in the figures shown below:
After a few moments, when the Pre-selection
function is activated, the touch screen will
show the following screen: