6.1 Customisation Menu:
•
For the Chocolate Latte Coffee beverage, the parameters are:
2
•
Repetition (indicates the number of the
selected beverage dispensed, from the min/
max that can be set);
•
Water Dose (volumetric dosing device
impulse, from the min/max that can be set);
•
Water Before (volumetric dosing device
impulse, from the min/max that can be set);
•
Water After (volumetric dosing dispensing
device impulse, from the min/max that can
be set);
•
Infusion (infusion time, from the min/max
that can be set);
•
Pressure Discharge (pressure discharge
time, from min/max that can be set);
•
MM1 Coffee Dose (grinding time, from the
min/max that can be set);
•
MM2 Coffee Dose(grinding time, from the
min/max that can be set);
•
Optional MM3 Coffee Dose (grinding
time, from the min/max that can be set);
•
Drying (tablet drying time, from the min/
max that can be set);
•
Hot Milk Dose (hot milk dispensing time,
from the min/max that can be set);
•
Hot Milk Emulsion (hot milk emulsion time,
from min/max that can be set);
Note: Beverage types and certain data programming flow items are present
according machine configuration set.
•
FM/NFM Hot Milk (this parameter enables
you to decide whether to dispense first
frothed milk or hot non-frothed milk.
YES
: FM - hot f. milk.
NO
: NFM./nf. milk;
v Mpl Hot Emulsion (speed of pump motor for
•
hot frothed milk, from the min/max that can be set);
•
v Mpl Hot Milk (hot milk pump motor speed,
from min/max that can be set);
•
Soluble Water Dose (soluble water
dispensing time, from the min/max that
can be set);
•
Soluble Dispenser Dose (dispenser
activated time, from the min/max that can
be set);
•
Continuous Powder Dispensing to
activate the function, move
from the red to the green background
.
•
Dispenser Advance Time (the mixer is
activated in advance of the dispenser, from
the min/max that can be set);
•
Emptying Duct Time (time needed to
empty soluble duct, from the min/max that
can be set);
•
Soluble Temp Level (indicates the number
43 EN
of soluble temperature levels, from the min/
max that can be set);
•
Milk Selected (for each beverage, allows
the decision whether to take milk from
container 1 or 2);
•
Second Heating (in a dual heating circuit,
a second outlet is activated to deliver coffee
at a lower temperature); enabled
NO.
the switch
YES/