7.6 Pre-selection Mode
The Pre-selection function makes it possible to
set up a list with the beverages to be dispensed
in sequence.
When this function is active, the touch screen
appears as follows:
2
Select the beverages
to be added to the list
by pressing the corresponding icons;
the selections made are shown on the right side
of the screen.
3
The beverage dispensing sequence can be changed by pressing and holding the chosen
icon for several seconds and dragging it to the desired position in the list.
The
icon will start dispensing the beverage
The
icon eliminates the beverage from the list.
Note: if inserting decaffeinated powder during a pre-set dispensing sequence, the next cof-
fee beverage from the list will be dispensed as decaf.
88 EN
1
Scroll
through the left part of
the screen to show the available beverag-
es.