Cimbali S30 Techniker-Handbuch Seite 155

5.3 Machine Data Menu
3
Select the icon machine data QR code
information.
5
hot milk
cold milk
second milk
second heating
soluble
steam
turbosteam or
autosteam
motorised nozzle
4
The QR Code image will appear on the touch
screen, to be framed with the device to obtain
the information:
Key to symbols used:
number of grinders
(can be configured from 1 to 3)
reduced power
grounds drawer
machine in self-service mode.
QR code to read machine data
(Serial number, counters)
operating hours
IP machine address
(if connected to WiFi network)
33 EN
CPU master memory version
H0
(touch screen)
CPU slave application memory version
H0
CPU slave bootloader version
Serial number
CPU master core temperature.
If the machine is connected to the internet, pushing this icon
allows activation of the remote software and documentation
update procedure.
NOTE: before beginning the software update procedure, make
sure all data to restore machine programming after the update
has been saved on the USB thumb drive.