Cimbali S30 Techniker-Handbuch Seite 136

1. Access to SELF configuration programming
Machines configured in the Self version lack direct access to the drop-down menu. Therefore, access to technical programming occurs as described
below:
1
Lack of drop-down menu.
4
Enter the Technician password:
Press the icon .
2
Press the "Sleep mode" button (8), found in the
back of the panel:
8
5
The icon indicates that the machine is in
Technical Programming mode:
14 EN
3
Press the icon .
3
To leave programming, press the green symbol
at the top right and then the red icon :