Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONTENTS
1.
2.
3.
3.1
4.
4.1
4.2
5.
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
8.
8.1
8.2
8.3
9.
9.1
9.2
10.
10.1
10.2
10.3
11.
11.1
11.2
11.3
11.4
11.5
11.6
12.
12.1
12.2
13.
13.1
13.2
13.3
14.
14.1
15.
16.
17.
18.
19.
Warning
Prior to installation, read these installation and
operating instructions. Installation and operation
must comply with local regulations and accepted
codes of good practice.
1. Symbols used in this document
Warning
If these safety instructions are not observed,
it may result in personal injury!
If these safety instructions are not observed,
Caution
it may result in malfunction or damage to the
equipment!
Notes or instructions that make the job easier
Note
and ensure safe operation.
4
2. General description
Page
The Grundfos CONTROL FS 1 controller is designed for
automatic and manual operation of a fire pump. It is delivered
4
pre-assembled from factory and is ready for installation.
4
The controller has been designed without main switches to
4
comply with the regulations of the VdS (German Loss Prevention
4
Authority).
4
4
3. Scope of delivery
4
The CONTROL FS 1 controller is delivered in a suitable
5
packaging containing these items:
5
5
Quantity
Designation
6
6
1
Steel plate control cabinet to IP54, colour
6
RAL3000, including modules
6
4
Bracket for wall mounting of controller
6
1
Operating tool for terminals
6
2
Resistance module WM1 for controllers with
6
monitoring module
6
6
3.1 Enclosed documentation
7
Use these installation and operating instructions in combination
8
with the following enclosed documentation:
8
•
wiring diagrams
8
•
data sheets or instructions for signal transmitters and
8
monitoring modules
8
•
installation and operating instructions for the pump.
8
8
4. Identification
9
9
4.1 Type key
9
10
10
Example:
11
System
11
Fire system
11
Number of motors
11
11
Motor rating
12
Monitoring
12
WM = with monitoring module
12
WO/M = without monitoring module
12
4.2 Nameplate
12
12
The nameplate made of sheet metal is riveted to the front door of
12
the control cabinet. The nameplate is positioned at the bottom
right of the door.
12
12
Type:
12
Product No.
12
Serial No.
Main Supply:
Pump input power:
Pump rated current:
VdS No.:
Made in Germany P1
Made in Germany P1
Fig. 1
Example of FS controller nameplate
FS 1x133-160kW WOM
96158772
123456789
Frequency: 50 Hz
3X400V
133/160 kW
Enclouse class: IP54
240/280 A
BMA/06&0103/A
0631
0631
WO/M
Werbung
Kapitel
Inhaltsverzeichnis
