Technogym ROTEX 600 XT PRO Benutzerhandbuch Seite 62

62
With the equipment
in Standby,
press the PROFILE
function key.
The display will show:
PROFILE 1-6 = 0
To select one of the profiles, press the
corresponding number key (e.g. 3) and then
press ENTER.
If you use the heart rate meter (heart sensor
or chest band), the equipment will detect your
heart rate. The display will show:
AGE = 0
key in your age (e.g. 30) with the number
keys and then press ENTER; the equipment
will then ask for your weight.
If you do not use the heart rate meter, the
equipment will immediately ask for your
weight and not age:
WEIGHT-LBS = 0
key in your body weight (e.g. 165) and then
press ENTER.
The display will show:
LEVEL = 0
use the number keys to key in the effort level
resulting from the level test (e.g. 7) and then
press ENTER.
The display will show:
TIME = 0
use the number keys to key in the duration
of the workout in minutes (e.g. 15) and then
press ENTER.
The equipment emits a beep and the workout
begins.
The columns of the altimetric profile
proportionately show the effort level in terms
of height. They light up one after the other
until they cover the entire amount of time set.
The flashing column represents the current
level.
The index corresponding to the effort level
and the indicator light for the PROFILE
function are lit.
At any time you can:
- adjust the effort level of the individual step
with the corresponding keys (the change
affects the current step only);
- interrupt the workout for a pause with the
STOP or CLEAR key;
- end the workout by pressing the STOP
key twice.
If you pause, after pressing STOP or CLEAR,
and then press the QUICK START key, the
workout resumes. If you press STOP again,
the workout ends and the equipment returns
to Standby. The equipment guides the user
with the following two messages:
STOP: END
QUICK START: RESTART
R 600 XT PRO
OTEX