Technogym ROTEX 600 XT PRO Benutzerhandbuch Seite 21

1.3 I
NSTALLATION AND ASSEMBLY
Thread the cables protruding from the upper
handgrip into their holes on the side
handgrip, as shown in the figure.
Raise the upper handgrip and insert it in the
special holes on the side handgrips; at the
same time, pull the cables slightly taut, as
illustrated in the figure.
Once again, apply gentle pressure to push
the ends of the upper handgrip into its holes
on the side handgrips.
D
ANGER
When you install the upper handgrip,
take great care not to damage the
cable.
01329002
21
01329003
0132900