24
1.3.2 Moving the equipment
To move theequipment, you must pull out
lever A, behind the pedals, and lift it until the
wheel located under the frame touches the
ground.
The equipment is also equipped with fixed
front wheels. After lowering the rear wheel,
you can move the equipment by pushing or
pulling it front-wards and back-wards, or to
the right or left.
If floor conditions do not permit the use of
wheels, the equipment must be moved with
normal hoisting and moving equipment.
D
ANGER
Great caution must be exercised
while moving and positioning it on the
ground, since the equipment could
lose its balance.
1.3.3 Leveling
The back feet are used for leveling:
A - screw or unscrew the feet until the frame
is horizontal
B - after adjusting, tighten the lock nuts.
147
R
600 XT PRO
OTEX
147-1