E) Setting The Alarm; F) Switching The Alarm Function On/Off; G) Stopping The Alarm Signal - Conrad WS-3650 Bedienungsanleitung

e) Setting the alarm

Touch the "TIME" display area at the upper left of the display. Then the bottom of the display shows:
*TIME* *ALARM*
*EXIT*
You can exit the menu using the "EXIT" button; you can move on to set the alarm hour by pressing "ALARM".
AL HR:18
*NEXT* *DOWN*
Set the alarm hours using "UP" or "DOWN" (press each field longer for fast setting), you can move on to set the
minutes by pressing "NEXT".
AL MIN:30
*EXIT* *DOWN*
Set the alarm minutes using "UP" or "DOWN" (press each field longer for fast setting), you can exit the menu by
pressing "EXIT".

f) Switching the alarm function on/off

Touch the "TIME" display area at the upper left of the display. Then the bottom of the display shows:
*TIME* *ALARM*
*EXIT*
If you now touch the "TIME" display area again, you can switch the alarm function on or off. When the alarm function
is switched on the symbol "(((•)))" appears next to the time.
To return to normal display mode, touch the "EXIT" button or wait a few seconds until the weather station
automatically returns.

g) Stopping the alarm signal

When the set alarm time is reached and the alarm rings, it can be switched off by touching any part of the display.
64
*UP*
*UP*