I) Air Pressure Development Display; J) Absolute And Relative Air Pressure; K) Display Minimum/Maximum Values For Air Pressure, Alarm Function - Conrad WS-3650 Bedienungsanleitung

i) Air Pressure development display

On the right next to the weather forecast display there is a development display for barometric pressure ("PRESSURE
HISTORY"). This shows the development over a period of 24 or 72 hours.
If you touch the bar display, the labelling of the bars changes from 0-24h to 0-72h.
-24h -18h -12h

j) Absolute and relative air pressure

Touching the barometric pressure display field several times switches the field between the absolute ("abs" in the
display) and the relative ("rel" in the display) barometric pressure.

k) Display minimum/maximum values for air pressure, alarm function


The following displays and settings are valid for the absolute or relative barometric pressure, depending
on what you have activated in the display (see Chapter 14.k).
Touch the display field with the barometric pressure, the barometric pressure value then begins to flash.
Furthermore, the display shows the following in the text field at the bottom:
* MIN * *MAX *
*ALARM* *EXIT*
Touch the "MIN" or "MAX" field to display the minimum or maximum values. The "ALARM" button displays and allows
setting of the upper and lower alarm limits, se below. "EXIT" allows you to leave the menu. Depending on your
selection of "MIN" or "MAX", the following appears:
* MIN PRESSURE *
956.9hPa *EXIT*
You can reach the previous menu by pressing "EXIT". Pressing "MIN PRESSURE" or "MAX PRESSURE" allows you
to delete the minimum or maximum value, the following confirm check appears:
RESET RECORD
*CONFIRM* *EXIT*
If the previously displayed minimum or maximum value is to be deleted, then confirm by pressing "CONFIRM". You
can reach the previous menu by pressing "EXIT".
66
-9h -6h -3h -0h
* MAX PRESSURE *
1040.hPa
-72h -48h -36h
*EXIT*
-24h -12h -6h -0h