Activating/Deactivating The Alarm Function; Displaying Alarm Times 1 And 2; Switching The Alarm Function On/Off; Setting The Alarm Time - Conrad KW 9110 Bedienungsanleitung

q) Alarm functions

Displaying Alarm Times 1 and 2

Briefly press the "MODE/SET" (4) button to switch between the time display and alarm time 1
or alarm time 2.

Activating/deactivating the alarm function

• First select one of the two alarm times with the "MODE/SET" button (4).
• You can now use the " " button (2) on the front of the weather station to activate the selected
alarm function (display "On") or to deactivate it (display "Off").

Setting the Alarm Time

• First select one of the two alarm times with the "MODE/SET" button (4).
• Press and hold the "MODE/SET" button (4) for 3 seconds until the hours in the alarm time
start flashing.
• Adjust the hours with the " " (1) or " " (2) buttons.
• Briefly press the "MODE/SET" button (4), the alarm time minutes flash. Adjust the minutes
with the " " (1) or " " (2) buttons.
• Briefly press the "MODE/SET" button (4). The symbol for the alarm time flashes.
• With the " " (1) or " " (2) buttons you can turn the alarm function on (display "On") or off
(Display "Off").
• Either wait a few seconds until the time display is automatically exited.
Or simply press the "MODE/SET" (4) button often enough until the time is shown in the
display.

Stopping the alarm signal

To end the alarm signal emitted when the alarm time is passed, briefly press the "MODE/SET"
(4), " " (1) or " " (2) buttons.

Snooze function ("SNOOZE")

When the alarm sounds at the set time, you can activate the snooze by briefly pressing the
"SNOOZE/LIGHT" button (3).
This interrupts the alarm signal for a few minutes before it starts again.
62