Conrad WS-3650 Bedienungsanleitung Seite 69

You can reach the previous menu by pressing "EXIT". Pressing "MIN TEMP" or "MAX TEMP" allows you to delete
the minimum or maximum value, the following confirm check appears:
RESET RECORD
*CONFIRM* *EXIT*
If the previously displayed minimum or maximum value is to be deleted, then confirm by pressing "CONFIRM". You
can reach the previous menu by pressing "EXIT".
View and set alarm limit values
If you have selected "ALARM" in the first menu, the following appears:
*LO AL* *HI AL*
*EXIT*
Depending on whether you have selected the lower ("LO AL") or upper ("HI AL") alarm, the following appears:
LO 0.0 °C
*ON/OFF* *DOWN*
Set the desired temperature value for the lower ("LO") or upper ("HI") alarm limit with the "UP" and "DOWN" buttons
(hold down the respective field for longer for fast setting).
You can use "ON/OFF" to switch each respective alarm on or off. Depending on whether the upper or lower alarm
was selected previously, the following appears:
LO ALM OFF *ON *
*EXIT* *OFF*
"ON" switches on the alarm "OFF" switches it off.
The symbol "(((•)))" appears on the left next to the temperature display if the alarm is activated and the text "LO AL"
and/or "HI AL" appears.
You can reach the previous menu by pressing "EXIT".
*UP* HI 30.0 °C
*ON/OFF*
HI ALM OFF *ON *
*EXIT*
*UP*
*DOWN*
*OFF*
69