Herunterladen Inhalt Inhalt Diese Seite drucken

N) Display Minimum/Maximum Values For Interior/Exterior Humidity, Alarm Function - Conrad WS-3650 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

n) Display minimum/maximum values for interior/exterior humidity, alarm function

Touch either the interior or exterior humidity display area. The respective value begins to flash. Furthermore, the
display shows the following in the text field at the bottom:
* MIN *
*MAX *
*ALARM*
*EXIT*
Touch the "MIN" or "MAX" field to display the minimum or maximum values. The "ALARM" button displays and allows
setting of the upper and lower alarm limits, se below. "EXIT" allows you to leave the menu. Depending on selection
of "MIN" or "MAX" the following display appears ("IN" is shown if the interior humidity was selected, "OUT" if exterior
humidity selected):
*MIN HUMIDI IN *
33 o /o RH
*EXIT*
*MAX HUMIDI IN *
78 o /o RH
*EXIT*
You can reach the previous menu by pressing "EXIT". Pressing "MIN HUMIDI" or "MAX HUMIDI" allows you to delete
the minimum or maximum value, the following confirm check appears:
RESET RECORD
*CONFIRM* *EXIT*
If the previously displayed minimum or maximum value is to be deleted, then confirm by pressing "CONFIRM". You
can reach the previous menu by pressing "EXIT".
View and set alarm limit values
If you have selected "ALARM" in the first menu, the following appears:
*LO AL*
*HI AL*
*EXIT*
Depending on whether you have selected the lower ("LO AL") or upper ("HI AL") alarm, the following appears:
LO44 o /o RH
*ON/OFF*
*DOWN*
Set the desired humidity for the lower ("LO") or upper ("HI") alarm limit with the "UP" and "DOWN" buttons (hold down
the respective field for longer for fast setting).
You can use "ON/OFF" to switch each respective alarm on or off. Depending on whether the upper or lower alarm
was selected previously, the following appears:
LO ALM OFF *ON *
*EXIT*
*OFF*
"ON" switches on the alarm "OFF" switches it off.
The symbol "(((•)))" appears on the right next to the humidity display if the alarm is activated and the text "LO AL"
and/or "HI AL" appears on the left.
You can reach the previous menu by pressing "EXIT".
70
*MIN HUMIDI OUT*
45 o /o RH
*MAX HUMIDI OUT*
70 o /o RH
HI70 o /o RH
*UP*
*ON/OFF*
HI ALM OFF *ON *
*EXIT*
*EXIT*
*EXIT*
*UP*
*DOWN*
*OFF*

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis