T) Alarm Function For Wind Directions - Conrad WS-3650 Bedienungsanleitung

You can use "ON/OFF" to switch the alarm on or off. You will see:
HI ALM OFF *ON *
*EXIT* *OFF*
"ON" switches on the alarm "OFF" switches it off.
The symbol "(((•)))" appears on the left next to the wind speed display if the alarm is activated and the text "HI AL"
appears.
You can reach the previous menu by pressing "EXIT".

t) Alarm function for wind directions

First repeatedly press the display area in the middle of the wind direction display to select the wind direction (either
as compass direction or degrees) see Chapter 14. r).
The value begins to flash; furthermore the following appears below in the text area:
*DIR AL*
*EXIT*
You can exit the menu using the "EXIT" button; you can move on to set the alarm by pressing "DIR AL". You will see:
* WNW OFF** UP *
*NEXT* *DOWN*
On the left you see the display, if you selected wind direction as a compass bearing at the start, on the right degrees.
You can use "UP" or "DOWN" to select the wind direction which you would like to activate monitoring for. The degrees
can be displayed in increments of 22.5° (without decimal points, i.e. 22° or 47° instead of 22.5° or 47.5°).
Touch the left upper area with the wind direction display (in the example above "WNW OFF" and/or "22° OFF"), the
display changes from "OFF" to "ON" (or vice versa).
If you have selected one (or several) wind directions to be monitored (e.g. "W" for Westerly), then touch the "NEXT"
area.
DIR ALM OFF *ON*
*EXIT* *OFF*
"ON" switches on the alarm "OFF" switches it off.
The symbol "(((•)))" appears on the left next to the wind speed display if the alarm is activated and the text "DIR AL"
appears.
You can reach the previous menu by pressing "EXIT".
74
* 22° OFF** UP *
*NEXT* *DOWN*