O) Switching On The Rain Sensor Display; P) Display Minimum/Maximum Values For Amount Of Rain, Alarm Function - Conrad WS-3650 Bedienungsanleitung

o) Switching on the rain sensor display

Repeatedly pressing the amount of rain display area (left display area) switches between:
• Amount of rain in the last hour ("1h" shown in display)
• Amount of rain in the last 24 hours ("24h" shown in display)
• Amount of rain in the last week ("week" shown in display)
• Amount of rain in the last month ("month" shown in display)

The display for the amount of rain in the last week or the last month does not depend on the current
amount of rain but rather the last complete week or the last complete month.

p) Display minimum/maximum values for amount of rain, alarm function

Touch the rain amount display area. The respective value begins to flash. Furthermore, the display shows the
following in the text field at the bottom:
*MAX *
*ALARM* *EXIT*

Please note that the alarm function is only possible for the rain amount in the last hour ("1h" in the
display) and the rain amount in the last 24 hours ("24h" in the display).
If "week" (amount of rain in the last week) or "month" (amount of rain in the last month) is displayed,
no alarm function is available, the display "ALARM" is not visible.
Touch the "MAX" field to display the maximum values. The "ALARM" button displays and allows setting of the upper
alarm limits, see below. "EXIT" allows you to leave the menu. Depending on whether "1h" or "24h" has been selected
in the display (see Chapter 14. o), the following now appears:
* MAX RAIN 1h
21.9 mm *EXIT*
You can reach the previous menu by pressing "EXIT". Pressing "MAX RAIN" allows you to delete the maximum value,
the following confirm check appears:
RESET RECORD
*CONFIRM* *EXIT*
If the previously displayed maximum value is to be deleted, then confirm by pressing "CONFIRM".
You can reach the previous menu by pressing "EXIT".
* * MAX RAIN 24h *
80.5 mm *EXIT*
71