Q) Deleting Total Amount Of Rain - Conrad WS-3650 Bedienungsanleitung

View and set alarm limit values
If you selected "ALARM" in the first menu (only for rain amounts of the last hour ("1h" in display) or the last 24 hours
("24h" in display), the following appears:
HI 50.0 mm
*ON/OFF* *DOWN*
Set the desired amount of rain for the upper ("HI") alarm limit with the "UP" and "DOWN" buttons (hold down the
respective field for longer for fast setting).
You can use "ON/OFF" to switch the alarm on or off. You will see:
HI ALM OFF *ON *
*EXIT* *OFF*
"ON" switches on the alarm "OFF" switches it off.
The symbol "(((•)))" appears on the left next to the amount of rain display if the alarm is activated and the text "HI AL"
appears.
You can reach the previous menu by pressing "EXIT".

q) Deleting total amount of rain

The display area for the total amount of rainfall (right display area for rain sensor, marked "TOTAL") you can read
the total amount of rain which has fallen since the value was last reset.
To delete this value, touch the display area, the display area flashes. At the bottom of the text display you will see:
* RAIN TOTAL
* 29.5 mm *EXIT*
You can reach the main menu by pressing "EXIT": Pressing "RAIN TOTAL" allows you to delete the saved values,
the following confirm check appears:
RESET RECORD
*CONFIRM* *EXIT*
If the previously displayed total rain value is to be deleted, then confirm by pressing "CONFIRM".
72
*UP*
*