Conrad WS-3650 Bedienungsanleitung Seite 61

*FACTORY RESET *
*EXIT*
The last settings menu allows the weather station to be reset to its original settings.

Note, this process takes 5 minutes and requires you to remove the batteries and disconnect the mains
power supply!
If the button "FACTORY RESET" is pressed, the confirm query appears:
* CONFIRM
*EXIT*
"EXIT" allows you to leave the menu. "CONFIRM" activates the basic settings, the following appears:
FACTORY RESET
IN PROGRESS
This display remains in place for some 5 minutes. Please wait for this period of time, the weather station cannot be
operated during this period, it doesn't react to the display being touched.
After 5 minutes, the following appears:
REMOVE BATTERY
Now remove the batteries from the weather station . If you operate the weather station using the mains power supply,
disconnect the supply, remove it from the mains power socket.
Wait for at least 10 seconds after all the display symbols have disappeared, before restarting the weather station.
*
61