Herunterladen Inhalt Inhalt Diese Seite drucken

Total Magnification - Leica DMLB Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Total magnification

Total magnification = objective
magnification x eyepiece magnification.
If using the magnification changer ( → p. 65,
Fig. 45.1), multiply the set magnification factor,
e.g. 1.5x, as well.
Examples:
Objective Eyepiece
10x/0.22
10x/20
10x/0.22
10x/20
40x/0.60
10x/20
40x/0.60
10x/20
40x/0.60
10x/20
In the last example, therefore, the Useful Magnification has been exceeded, which may result in
blurred images.
Object field diameter
If you divide the eyepiece field of view number
by the objective magnification, you obtain the
true diameter of the observed object field. The
eyepiece magnification is not taken into account
in the calculation. With the 10x/25 eyepiece and
a 50x objective, for example, an object field of
25 : 50 = 0.5 mm can be surveyed.
If the tube factor (TF) is other than 1x, the result
must be divided by the tube factor as well.
In the above example, the object field would be
0.5 : 1.5 = 0.33 mm with TF = 1.5*.
Simple survey magnification
Use a 4x, 5x or 10x objective. For condenser
UCA/P, swing in the condenser top. Hold a
specimen over the light exit in the microscope
base instead of putting it on the stage.
Magnification
Total
changer
magnification
100x
2x
200x
400x
1.5x
600x
2x
800x
Useful magnification
The total magnification of a light microscope is
subject to physical limits known as the useful
magnification. This is roughly a thousand times
the aperture of the objective, → p. 28.
Upper limit
of useful
magnification
220x
220x
600x
600x
600x
!
Caution:
Do not cause any scratches!
Focus by adjusting the height of the stage (28.7)
or the condenser (28.4).
Although this method does not claim to produce
a good image, it offers the advantage of great
field depth, e.g. for fast scanning of series of
specimens in a similar way to a magnifying
glass. If the photomicrographic equipment does
not comprise a data reflection facility, a labelled
piece of foil or paper can be copied onto the
beginning of the film, for example, to enable
identification in the photo lab.
Comment
not exceeded
not exceeded
not exceeded
not exceeded
exceeded
33

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

DmlmDmlp

Inhaltsverzeichnis