Leica DMLB Bedienungsanleitung Seite 25

!
Attention:
Protect movable interior parts with foam rubber
or similar in case of shipment. Disassemble the
burner.
To open lamphousing 105 z: undo screws (22.4),
pull the cut-out plug slightly out of the socket
(22.11) and flip up the lid of the lamphousing.
Undo the screws (22.10) and remove the lamp
holder (Fig. 24). Remove the spent burner by
loosening the clamp screws (24.1 and 24.3).
Fig. 24 Lamp holders for gas discharge lamps*
1 Upper clamp, 2 Seal point of the burner, 3 Lower clamp, 4, 6 Drill holes for fixing the holder, 5 Sockets for cut-out plug,
7 Protective cover
Hg 50
1
2
4
5
6
Hg 100
Insert burner as follows, adhering strictly to
the above safety information:
Do not remove the protective covering yet
(24.7).
Xe 75
3
Hg 100
Stab.
1
3
Attention:
1
7
3
1
3
25