Front Panel Programming; Introduction; Entering Programming Mode; Exiting Programming Mode - Motorola P100 Serie Servicehandbuch

Radio Programming and Tuning: Front Panel Programming
5.9

Front Panel Programming

5.9.1

Introduction

This mode allows you to change the feature parameters to enhance the use of your radio.
To program your radio using the front panel, you need to enter Programming Mode in Dealer
Configuration. This configuration/mode allows you to edit a number of features to enhance the use of
this radio.
In user configuration, a user will have a limited choice to program the radio.
5.9.2

Entering Programming Mode

Make sure the radio is turn off. Press Side Programmable Button 1 (top side programmable button),
and turn ON the radio. A tone is heard, indicating that the radio is in Programming Mode. The
indicator illuminates and the "BCKLIGHT" is displayed on the radio LCD.
5.9.3

Exiting Programming Mode

Turn off the radio to exit Programming Mode.
5.9.4

Accessing Front Panel Programming Mode Parameters

Press
PTT to select the menu or submenu item, or
Press Side Programmable Button 1 to either return to previous menu level or to exit the selection
parameter without change
5.9.5

Editing Front Panel Programming Mode Parameters

A. Non-MDC1200 and Non-QCII Models
Table 5-6. Front Panel Programming Mode Parameters: Non-MDC1200 & Non-QCII Models
1st Level
Main Menu
Sub-Menu
BCKLIGHT
(Backlight)
BATTERY SAVER
(Battery Saver)
TYPE
(Battery Type)
or to scroll through the parameters for each menu or submenu item, or press
2nd Level
Sub-Menu
AUTO
TOGGLE
OFF
NORMAL
ENHANCED
NIMH
LI
H LI
Setting
-
ION
-
ION
Remarks
AUTO – Backlight Off if no keypress for more
than 5 seconds.
Pressing the Backlight button again prolongs
illumination time.
TOGGLE – Allows Backlight Button to toggle
control the ON/OFF status of the backlight.
Helps to extend battery life. When enabled, turns
off the radio receiver circuitry periodically when
no activity is detected.
NORMAL – turns off radio less frequently; select
this to save battery when expecting to receive
Selective Call or Call Alert.
ENHANCED – turns off receiver for a longer
duration; select this to maximize battery saving
with no Selective Call or Call Alert.
Type of battery radio uses.
NIMH – Nickel Metal Hydride
- -
LI ION – Lithium Ion
-
H LI ION – High Capacity Lithium
5-21
-
Ion