Radio Reassembly - Detailed; Speaker Reassembly; Figure 8-13. Speaker Removal; Figure 8-14. Speaker Reassembly - Motorola P100 Serie Servicehandbuch

Maintenance – Non Keypad Model: Disassembling and Reassembling the Radio
5. Remove the Speaker Felt (6) from the grille area (Refer Figure 8-13).
Speaker Retainer
Speaker Insulator
Speaker
Speaker Felt
8.5.2 Radio Reassembly – Detailed

8.5.2.1 Speaker Reassembly

1. Place the Speaker Felt (6) onto the grille area.
2. Align the speaker wire at three o'clock position and push down the speaker until fully adhere onto
the front housing.
3. Align the Speaker Insulator (9) at twelve o'clock position and push down until fully adhere onto the
speaker.
4. Install the Speaker Retainer (8).
5. Tighten the Speaker Retainer to the housing with a Phillips screw torque to 1.0 kgf – 1.2 kgf
(Refer Table 8-3 on page 8-17 for torque in other units).
Speaker Retainer
Speaker Insulator
Speaker
Speaker Felt

Figure 8-13. Speaker Removal

Figure 8-14. Speaker Reassembly

8-13