Speaker Disassembly - Motorola P100 Serie Servicehandbuch

6-12 Maintenance – Full Keypad Models:Disassembling and Reassembling the Radio
3. Remove the Front Circuit Board from the Front Housing. (Refer Figure 6-11).
Circuit Board
Figure 6-11. Front Circuit Board Removal
4. Remove the LCD (33) and Keypad (38) from the Front Housing. (Refer Figure 6-12).
LCD
Keypad
Figure 6-12. LCD and Keypad Removal

6.5.1.4 Speaker Disassembly

1. Remove the screw holding the Speaker Retainer (7) to the Front Housing with a Phillips
screwdriver.
2. Remove the Speaker Retainer from the Housing.
Note: Be careful not to damage the Speaker Wire when removing the Retainer Bracket.
3. Remove the Speaker from the Housing with a flat head screwdriver.
4. Remove the Speaker Insulator (8) from the speaker.