Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance – Full Keypad Models:Disassembling and Reassembling the Radio
Note: The speaker wire and flexible cable connector connecting the Front Housing Assembly (1)
and the Chassis (22) prevent the two units from being completely separated.
d.
Remove the speaker wire connector connecting the main circuit board and the internal
speaker on the front housing with the tweezers. (Refer Figure 6-6)
e.
Lay the front housing down. Rotate the chassis sideways from the Front Housing
Assembly (1) and lay it down.
f.
Push the latches on the Front Circuit Board (36) sideways to the right to release the
flexible cable from the connector. (Refer Figure 6-7).
Latches
Figure 6-6. Speaker Wire Removal
Figure 6-7. Unlatch the Flexible Cable
Speaker Connector
6-9
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
