Motorola P100 Serie Servicehandbuch Seite 81

Radio Programming and Tuning: Front Panel Programming
Table 5-7. Front Panel Programming Mode Parameters: MDC1200 & QCII Models (Continued)
Main 1st Level
Menu Sub-Menu
**
TX PL
(Transmit
TPL/DPL)
**
TPL 1
**
TPL 2
**
TPL 3
**
RXDPL TY
(RX DPL
Type)
**
TXDPL TY
(TX DPL
Type)
**
RV BURST
(Reverse
Burst)
**
TOC
(Turn Off
Code)
SQUELCH
(Squelch
Level)
TIME OUT
(Time
Out Timer)
POWER
(Power Level)
PRIME CH
(Prime
Channel
2nd Level 3rd Level
Sub-Menu Sub-Menu
CH-001 ...
CH-099
CH-001 ...
CH-099
CH-001 ...
CH-099
CH-001 ...
CH-099
CH-001 ...
CH-099
CH-001 ...
CH-099
CH-001 ...
CH-099
Setting
CSQ CSQ
TPL 067.0 001 ...
TPL 254.1 042
DPL 023 or043
DPL 754 127
TPL 1 TPL 1
TPL 2 TPL 2
TPL 3 TPL 3
067.0
067.1 ...
254.9
255.0
067.0
067.1 ...
254.9
255.0
067.0
067.1 ...
254.9
255.0
DPL
INV DPL (Invert DPL)
DPL
INV DPL (Invert DPL)
NONE
180
240
ENABLE
DISABLE
NORMAL
TIGHT
OFF
010
020
...
590
600
HIGH
LOW
OFF
001...
099
Remarks
Transmit PL
• Frequency: CSQ, TPL 67.0 – TPL 254.1,
DPL 023 – DPL 754, user defined TPL 1,
user defined TPL 2, & user defined TPL 3
• Code: CSQ, 001 – 127, user defined TPL 1,
user defined TPL 2, & user defined TPL 3
Non-standard private line (TPL) frequency.
67.0 Hz – 255.0 Hz with 0.1 Hz step.
Non-standard private line (TPL) frequency.
67.0 Hz – 255.0 Hz with 0.1 Hz step.
Non-standard private line (TPL) frequency.
67.0 Hz – 255.0 Hz with step size of 0.1 Hz.
Receive DPL Type – DPL or Invert DPL.
Transmit DPL Type – DPL or Invert DP.
Reverse burst setting – None, 180° or 240°.
Turn Off Code setting – enable or disable.
NORMAL squelch level – receive weak
signals. TIGHT squelch level – receive strong
signals and eliminates unwanted noise.
Maximum duration (in seconds) the radio can
transmit continuously.
Power level – High or Low.
The channel that you wish to spend most of
your time monitoring.
The radio will always switch back to the Prime
Channel if it is idle for more than the
preprogrammed hang-time in other channels.
5-29