Front Circuit Board And Poron Pad Disassembly; Speaker Disassembly; Figure 8-11. Front Circuit Board Removal; Figure 8-12. Poron Pad Removal - Motorola P100 Serie Servicehandbuch

8-12

8.5.1.3 Front Circuit Board and Poron Pad Disassembly

1. Remove the five screws holding the Front Circuit Board (36) to the front housing with a Phillips
screwdriver.
2. Remove the Front Circuit Board from the Front Housing. (Refer Figure 8-11).
3. Remove the Poron Pad (38) from the Front Housing. (Refer Figure

8.5.1.4 Speaker Disassembly

1. Remove the screw holding the Speaker Retainer (8) to the Front Housing with a Phillips
screwdriver.
2. Remove the Speaker Retainer from the Housing.
Note: Be careful not to damage the Speaker Wire when removing the Retainer Bracket.
3. Remove the Speaker from the Housing with a flat head screwdriver.
4. Remove the Speaker Insulator (9) from the speaker.
Maintenance – Non Keypad Model: Disassembling and Reassembling the Radio

Figure 8-11. Front Circuit Board Removal

Figure 8-12. Poron Pad Removal

Circuit Board
8-12).
Poron Pod