Call Message; Temporary Power Failure; System Error; Standard Programming Of Keys - Motorola MR 11 S-C Bedienungsanleitung

923991 19.10.1999
GB

Call Message

When a call is received, the green LED (item 35) flashes and the loudspeaker
symbol (item 22) is activated. The call is signalled acoustically by the follow-
ing signals:
Selective call
Group call
Collective call

Temporary Power Failure

Strong power interruptions often occur when the vehicle's engine is started.
The radio switches off when the power supply voltage drops below approx.
5 V. The radio can bridge voltage interruptions up to approx. 4 seconds inas-
much as it switches itself back on automatically. The radio must be switched
back on manually if the power failure lasts longer.
Switching on is as if the radio were switched on for the first time, previous
operating states (apart from channel and volume) are not stored.

System Error

The text "SERVICE" in the display flashes,
the error is signalled by short, low tones.
Switch the radio off and on or disconnect it from the power supply and then
switch it back on after reconnecting. If the system error persists, please
contact the after-sales service.
Standard Programming of the Keys
Of the keys described below, items 2–6, 11–14, and 16, 17 are named after
their standard programming but can be assigned other programmable func-
tions at the customer's request; the functions available for the respective key
are adapted to a reasonable operation and can be inquired from your after-
sales service representative or dealer.
64
10:28 Uhr Seite 64
one high tone, long
two high tones, medium
three high tones, short