Motorola P100 Serie Servicehandbuch Seite 86

5-34
Table 5-7. Front Panel Programming Mode Parameters: MDC1200 & QCII Models (Continued)
Main 1st Level
Menu Sub-Menu
PHONE XX
(XX = 01 to
16)
DTMF
*
CALL LST
(Call List
MDC1200
2nd Level 3rd Level
Sub-Menu Sub-Menu
ACTIVATE DTMF01 ...
DTMF16
SYS SEL DTMF01 ...
(DTMF DTMF16
System
Select)
ALIAS EDIT
DELETE
CALL XX
(XX = 01 to
16)
ACTIVATE MDC01 ...
MDC16
ALIAS EDIT
DELETE
Radio Programming and Tuning: Front Panel Programming
Setting
NUMBERXX
NAMEXX
ENABLE
DISABLE
DTMF1.....
DTMF4
XXXXXXXX
ID XX
ALIAS XX
ENABLE
DISABLE
XXXXXXXX
Remarks
Set Phone No X.
User can use radio keypad to enter up to16
characters consisting of 0,1,2,3,4,5,6,7,8,9,#,*.
Note: NUMBERXX will appear if the phone list
entry is empty.
Set alias for Phone No X.
User can use radio keypad to enter up to 8
characters consisting of A – Z, 0 – 9, \, #, < >,
*, +, _, /, -.
Note: NAMEXX will appear if the phone list
entry is empty.
Enable or disable a Call List.
Select DTMF System for the Call List.
Allows you to edit call ID. XXXXXXXX denotes
the call ID numbers.
Note: The alias will appear at 1st menu level if
the call list entry is not empty.
Selecting DELETE option will delete the call list
entry.
Set call list ID X.
Use radio keypad to enter up to 8 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Note: ID XX will appear if the call list entry is
empty.
Set alias for call list ID X.
Use radio keypad to enter up to 8 characters
consisting of A - Z, 0 - 9, \, #, < >, *, +, _, /, -
Note: Alias XX will appear if the call list entry is
empty.
Enable or disable a Call List.
Allows you to edit call ID. XXXXXXXX denotes
the call ID numbers.
Note: The alias will appear at 1st menu level if
the call list entry is not empty.
Selecting DELETE option will delete the call list
entry.