Motorola P100 Serie Servicehandbuch Seite 77

Radio Programming and Tuning: Front Panel Programming
Table 5-6. Front Panel Programming Mode Parameters: Non-MDC1200 & Non-QCII Models (Continued)
1st Level
Main Menu
Sub-Menu
SCRMBLIN CHANNEL
(Voice (Scrambling
Inversion Channel
Scrambling) Select)
CODE
(Scrambling
Code
Select)
ACC CODE
*
PHONE
(Access Code)
DEACCCODE
(Deaccess
Code)
PHONE 01
ALIAS
(Assigned
name
PHONE XX
(XX = 01 to 16)
*
Applicable to Keypad Models only.
2nd Level
Setting
Sub-Menu
-
ENABLE
CH 001 ...
DISABLE
-
CH 099
3.29
3.39
XXXXXXXX
XXXXXXXX
NUMBER01
NAME 01
EDIT
DELETE
NUMBERXX
NAMEXX
Remarks
Scrambling – Enable or disable
Scrambling code – 3.29 or 3.39.
Access code for phone – XXXXXXXX.
Use radio keypad to enter up to 16 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Deaccess code for phone – XXXXXXXX.
Use radio keypad to enter up to 16 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Set Phone No 1.
Use radio keypad to enter up to16 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Note: NUMBER01 will appear if the phone list
entry is empty.
Set alias for Phone No 1.
User can use radio keypad to enter up to 8
characters consisting of A – Z, 0 – 9, \, #, < >, *, +,
-
_, /,
Note: NAME 01 will appear if the phone list entry
is empty.
Edit phone number – XXXXXXXX.
Note: The alias will appear at 1st menu level if the
phone list entry is not empty.
Delete the phone entry.
Set Phone No X.
User can use radio keypad to enter up to16
characters consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Note: NUMBERXX will appear if the phone list
entry is empty.
Set alias for Phone No X.
User can use radio keypad to enter up to 8
characters consisting of A – Z, 0 – 9, \, #, < >, *, +,
-
_, /,
Note: NAMEXX will appear if the phone list entry
is empty.
5-25