Recalling: In The Right Menu, Press Prev Page, And Press - Vevor Sds1102 Benutzerhandbuch

Function Menu
Function
Type
Save
Save and Recall the Waveform
The oscilloscope can store 16 waveforms, which can be displayed
with the current waveform at the same time. The stored waveform
called out can not be adjusted.
In order to save the waveform of CH1, CH2 and Math into the object
Wave0, the operation steps should be followed:
1. Turn on CH1, CH2 and Math channels.
2. Push the Utility button, select Function in the right menu, select
Save in the left menu. In the right menu, select Type as Wave.
3. Saving: In the right menu, select Source as All.
4. In the right menu, press Object. Select Wave0 as object
address in the left menu.
5. In the right menu, press Next Page, and select Storage as
Internal.
6. In the right menu, press Save to save the waveform.

7. Recalling: In the right menu, press Prev Page, and press

Object, select Wave0 in the left menu. In the right menu, select
Setting Description
Save Display the save function menu
Image Choose the saving type as image.
Save the current display screen.
The file can be only stored in a
USB storage, so a USB storage
must be connected first. The file
name is editable. The file is stored
in BMP format.
51