VEVOR SDS1102 Benutzerhandbuch Seite 53

Object as ON, the waveform stored in the address will be shown,
the address number and relevant information will be displayed at
the top left of the screen.
In order to save the waveform of CH1 and CH2 into the USB storage
as a BIN file, the operation steps should be followed:
1. Turn on CH1 and CH2 channels, turn off the Math channel.
2. Push the Utility button, select Function in the right menu, select
Save in the left menu. In the right menu, select Type as Wave.
3. Saving: In the right menu, select Source as All.
4. In the right menu, press Next Page, and select File Format as
BIN.
5. In the right menu, select Storage as External.
6. In the right menu, select Storage, an input keyboard used to edit
the file name will pop up. The default name is current system
date and time. Turn the M knob to choose the keys; press the M
knob to input the chosen key. The length of file name is up to 25
characters. Select the
7. Recalling: The BIN waveform file could be open by waveform
analysis software (on the supplied CD).
Shortcut for Save function:
The Copy button on the bottom right of the front panel is the shortcut
for Save function in the Utility function menu. Pressing this button is
equal to the Save option in the Save menu. The waveform, configure
or the display screen could be saved according to the chosen type in
the Save menu.
Save the current screen image:
key in the keyboard to confirm.
52