Alternate Trigger (Trigger Mode: Edge); How To Operate The Function Menu - Vevor Sds1102 Benutzerhandbuch

Alternate Trigger (Trigger mode: Edge)

Trigger signal comes from two vertical channels when alternate
trigger is on. This mode is used to observe two unrelated signals.
Trigger mode is edge trigger.
Alternate trigger (Trigger Type: Edge) menu list:
Menu
Type
Source
Next
Page
Coupling
Slope
Holdoff
Holdoff
Reset
Prev
Page

How to Operate the Function Menu

The function menu control zone includes 4 function menu buttons:
Settings Instruction
Set vertical channel trigger type as
ALT
alternate trigger.
CH1 Channel 1 as trigger signal.
CH2 Channel 2 as trigger signal.
Enter next page
AC Block the direct current component.
DC Allow all component pass.
Trigger on rising edge
Trigger on falling edge
100 ns - 10 s, turn the M knob to set
time interval before another trigger
occur.
Set Holdoff time as default value (100
ns).
Enter previous page
44