Main Menu Settings - Vevor Wp9600A Bedienungsanleitung

Broken cable
Cable knotting
Equipment
cleaning
Warning
OPERATING INSTRUCTIONS FOR HD DVR
REC/-: To start/stop recording
Play/+: To switch between recording and photographing. (Please refer to the icon in the top left corner)
MENU: To access and loop the settings main menu / long press to rotate the screen 0, 90, 180 or 270
degrees
>: To zoom out
<: To zoom in the image 0-36X
POWER: To power on/off the display screen

1. Main Menu Settings

1. Press MENU button the setup menu: PICTURE; OPTION; TIME; PHOTO; VIDEO
2. Press </> button to option sub-menu
3. Press REC button to adjust the setting"s value OR press REC button enter/confirm
4. Press PLAY button to exit
2. Recording and Photographing
1. Press PLAY button to switch between Recording and photographing. (please refer to the icon in the
top left corner)
2. Press REC button to start recording/photographing,then press REC button again to stop recording.
1. It is recommended to use the cable on the pipe with a diameter ≥ 60cm.
Pay attention to the force of pushing the cable to avoid breaking the
detection line.
2. This product is only used for pipeline detection and inspection and cannot
be used for other purposes.
1. When retracting and releasing cables, it shall be noted that the cables shall
not be crossed and knotted, and the bending radian of cables shall not be
less than 90 degrees.
2. When retracting the cable, pay attention to cooperate with the rotating iron
frame to orderly recycle, and do not use it violently.
When cleaning the equipment, turn off the power before cleaning to avoid
damage to the equipment.
If the fault cannot be solved, please do not disassemble it by yourself.
Please contact the after-sales service personnel.
07