Communication With Pc - Vevor Sds1102 Benutzerhandbuch

5. Communication with PC

The oscilloscope supports communications with a PC through USB.
You can use the Oscilloscope communication software to store,
analyze, display the data and remote control.
To learn about how to operate the software, you can push F1 in the
software to open the help document.
Here is how to connect with PC via USB port.
(1) Install the software: Install the Oscilloscope communication
software on the supplied CD.
(2) Connection: Use a USB data cable to connect the USB Device
port in the right panel of the Oscilloscope to the USB port of a
PC.
(3) Install the driver: Run the Oscilloscope communication
software on PC, push F1 to open the help document. Follow the
steps of title "I. Device connection" in the document to install
the driver.
(4) Port setting of the software: Run the Oscilloscope software;
click "Communications" in the menu bar, choose "Ports-Settings",
in the setting dialog, choose "Connect using" as "USB". After
connect successfully, the connection information in the bottom
right corner of the software will turn green.
78