Rotoclear S3 Bedienungsanleitung Seite 52

ROTOCLEAR S3
Introduction
Safety information
Before installing and commissioning the unit,
please carefully read through the operating man-
ualsfortheRotoclearS3aswellasyourmachine
tool and its safety functions. We have included
information on installing and using the system
safely. The manufacturer accepts no liability for
any issues that may occur due to non-observance
of this operating manual.
Please pay particular attention to the information
symbols.
Disclaimer
The manufacturer accepts no liability in the event
of loss due to fire, earthquake, intervention by
third parties or any other accidents, wilful or acci-
dental misuse, incorrect use or use under abnor-
mal conditions. Repairs resulting from this will be
invoiced by Rotoclear GmbH.
The manufacturer shall not be liable for accidental
loss due to use or non-use of this product, such as
the loss of business revenue.
Rotoclear GmbH accepts no liability in the event
of improper use.
Important information
The nameplate is an integral part of the unit.
Any modification of the unit, alterations to the
nameplate, or opening of the housing will result in
a loss of conformity and void the warranty.
Rotoclear,RotoclearS3and"InsightsinSight"are
registered trademarks of Rotoclear GmbH in Ger-
many and other countries.
Intended use
The intended use of the Rotoclear S3 extends to
applications in metal-cutting machine tools, in
particular milling machines and lathes or the cor-
responding closed environments in which media
such as cooling lubricants, oils, water, rinsing and
cleaningfluidsareused.
In environments of this kind, visibility is impaired
or obstructed by the media spraying or splash-
ing onto the window or protective screen. The
spinning window of the Rotoclear S3 continu-
ouslyflingsawayanyincomingparticlesorliquids
towards the outside to ensure a clear view through
the pane. This requires the sealing air to be per-
manently connected to the spinning window (in
accordance with the Rotoclear seal guarantee).
The rotor disc must also rotate constantly to pro-
ducetheself-cleaningeffectwhilethemachineis
switched on.
Only use Rotoclear S3 as intended. Operating
Rotoclear S3 for a purpose other than that spec-
ifiedbythemanufacturermayendangerpersons
and animals and damage property.
Improper use
Only use the spinning window for its intended
purpose and in the environments for which it was
designed to prevent any misuse.
When gluing the bonding flange, follow the
instructions exactly and use the adhesive before
thespecifiedminimumshelflifeexpirestoensure
51